Changing The Password For The Default User - Juniper JA2500 Junos Space Hardware Manual

JA2500 Junos Space Appliance Hardware Guide

Changing the Password for the Default User

88
Choice [1-6,QR]:
NOTE: Password changes take effect immediately. Any other changes that
you make to the settings do not take effect until you apply the changes. You
can apply the changes from the Junos Space Settings Menu or any sub-menu
by typing A at the prompt. Irrespective of the menu or sub-menu that you are
in when you apply changes, all changes to the appliance settings are applied.
This topic includes the following sections:
Changing the Password for the Default User on page 88
Changing Network Settings on page 89
Modifying the IP Address of the eth1 Interface on page 92
Changing the Time Zone and NTP Servers on page 93
Retrieving and Transferring System Log Files on page 93
Changing Firewall and SSH Settings on page 94
Accessing the Shell on page 94
Applying or Cancelling Changes to Settings on page 95
You can change the password for the default user (admin) for the Junos Space Appliance.
To change the password, do the following:
On the Junos Space Settings Menu, type
1.
Type when you are prompted to change the password for the admin user.
2. y
Type the current password and press Enter.
3.
at the prompt.
1
Copyright © 2018, Juniper Networks, Inc.