Table of Contents
Advertisement
Installation procedures
4.10 Wall or ceiling mount without rigging frame
General
In case of installing the projector to other positions than desktop or ceiling, it is preferred to use the rigging
frame designed for this purpose. In cases where this is not possible, suitable 3rd part brackets for safe
installation must be used to secure the unit from damage or causing injury. .
Attachment points.
The attachment points for additional rigging equipment are the same as for the adjustable feet at the bottom,
and also the corresponding points at the top of the projector.
Attachment point screw dimension
Tightening torque
Max load per attachment point
Projectors attachment points
Image 4–16 Attachment points bottom.
54
R5913593 /01
Njord
Attachment point specifications
M10, max 30mm deep
20 Nm
60 kg
Image 4–17 Attachment points top.
Advertisement
Table of Contents
