Advanced picture adjustments
10.1 16:9 to center function
About
This function is available (and necessary) only for the 16:9 variant of the projector.
Must be used only in cases where the input format is 16:9, in combination with a Cinemascope screen.
(2.35:1, 2.37:1, 2.39:1, 2.40:1)
The 16:9 to center functionality explained.
When a 16:9 content is projected on a Cinemascope screen, the lower and upper part of the picture will go
outside the screen. (Overshoot).. When 16:9 to center function is enabled, the picture will downsize to fit the
height of the screen. Therefore, in order to keep the aspect ratio, the image will not exploit the entire screen
width.
How to enter the 16: to center function
Home/Image/Advanced settings/16:9 to center
Image 10–1
Select this function by entering the menu path shown above.
Enter the slider switch to enable. The menu will show the status of the function, On of Off.
110
R5913593 /01
Njord