Table of Contents
Advertisement
Official installation of the upper side of the adapter on the flexible liner
2.1.Add a bead of Viton® caulking (resistance to condensate) all around
inside the adapter on the beginning of the flare. Add another bead
of Viton® caulking all around the outside of the flexible liner at 3/4"
from the edge (Figure 18).
Figure 18 -DuraSeal Flex Vi ton• caulking
16
2.2.Push the adapter on the liner all the way in, until you can't seethe
mark made on the flexible liner earlier (Figure 19). Make sure that
the Viton® caulking is sealed well at the joint inside the adaptor
by verifying inside the adaptor.
Figure 19-DuraSeal Flex assembly
2.3.Add a bead of the S-650 red caulking all around the outer junction
of the adapter and the flexible liner to make sure everything is well
sealed. Also add over the screw holes (Figure 20).
Figure 20- DuraSeal Flex S-650 caulking
Screw Holes
Advertisement
Table of Contents
