Maintenance - Fluke 114 User Manual

Maintenance

Maintenance of the Meter consists of battery and fuse
replacement, as well as case cleaning.
Replacing the Battery and Fuse
• Remove test leads from the Meter
• Use ONLY a fuse with the amperage,
To remove the battery door for battery replacement:
1. Remove the test leads from the Meter
2. Remove the battery door screw.
3. Use the finger recess to lift the door slightly.
4. Lift the door straight up to separate it from the case.
The battery fits inside the battery door, which is then
inserted into the case, bottom edge first, until it is fully
seated. Do not attempt to install the battery directly into the
case.
5. Install and tighten battery door screw.
Shop for Fluke products online at:
XWWarning
To avoid shock, injury, or damage to
the Meter:
before opening the case or battery door.
interrupt voltage, and speed ratings
specified.
MyFlukeStore
www.
True-rms Multimeters
Maintenance
edy11f.eps
17
1.888.610.7664
.com