Table of Contents
Advertisement
The timed thermostats of the Chronos series have got a backlit display with led. There
are some differences between battery powered models and mains powered models.
Battery Chronos
The battery powered models have got a backlighting of blue colour, which is activated
only if they are inside the menu of programming or if a key is pressed. In normal
operating status the backlighting results off.
This behaviour is not modifiable.
230V~ Chronos
The 230 V models have got a multicolor backlighting which can be configured
according to the preferences' user.
The possible configurations for the backlighting are the following:
• RGB (
) in this case the backlighting changes following the difference
between the measured temperature and the set temperature value. In
particular, it will be:
- blue, if the measured temperature is lower than the set temperature value of
at least 0.5°C (or we are inside any programming menu)
- green, if the difference between the measured temperature and the
set temperature value is, in absolute value, lower than 0.5°C (or if the
chronothermostat is in off mode)
- red, if the measured temperature is higher than the setpoint of at least 0.5°C
(or in case of probe error)
• BLUE (
) in this case the backlighting will be blue fixed
• GREEN (
), in this case the backlighting will be green fixed (blu inside
programming menu)
• RED (
), in this case the backlighting will be red fixed (blu inside
programming menu)
• OFF (
), in this case the backlighting is always off (useful for example in
bedrooms) (blu inside programming menu).
BACKLIGHTING MANAGEMENT
- 24 -
CHRONOS Chronothermostat User Manual
Advertisement
Table of Contents
