Table of Contents
Advertisement
4
Connections
POWER CONNECTION
Power connection must come direct from the battery terminals. WARRANTY IS VOID if power is not
connected as described in this section.
1. Connect power cable supplied DIRECTLY TO BATTERY
2. Ring terminals are used for battery connection and the end with Ferrules attached is used to connect
to the rear Jackal. (Refer page 3 for connection instructions)
3. Connect Ground to BATT -VE, Terminal B11 using the
4. Connect
5. Ensure that the battery connection to the Jackal is
Connecting 24V to the Jackal will VOID WARRANTY
July 2013
+12
Volts (+battery terminal) to BATT +VE, Terminal B10 using the
more quick guides @ www.farmscanag.com/jackal
RED
with BLACK stripe wire
+12 Volts
Disconnect the terminal plugs from
the Jackal if
ARC WELDING
machinery
red
wire
on
AM-Jackal-2
Advertisement
Table of Contents
