Table of Contents
Advertisement
10
Area & Speed Meter Setup (Wizard)
CALIBRATION (CONTINUED)
4. Scroll down to Alarm Beep and EDIT the number of audible beeps to be heard on the selected port if
an alarm sounds.
5. Select NEXT
6. Choose your units of display
7. Select NEXT
8. You can now EDIT the audible alarm points for a Min & Max range to be notified of a problem
9. Select NEXT
10. Create a name for your port if desired by pressing EDIT
11. Use the UP/DOWN/LEFT/RIGHT to change the letters. (Max 3 letters)
12. Select EXIT when done
13. Select NEXT
14. Confirm that you wish to display km/hr. or mph on the next line (YES or NO)
15. Select NEXT
16. Return to the front screen to confirm setup is complete by selecting EXIT
** Refer to page XX to edit decimal places, rename the port or change the unit of measure i.e. to
mph,acres,m,ft
Example: Speed (km/h) & area meter
July 2013
Ha (Hectares) | Ac (Acres) | m^2 (Meters squared) | Km^2 (Kilometers squared)
Example : Setup to measure distance
more quick guides @ www.farmscanag.com/jackal
Example: Speed (mph) & acre meter
AM-Jackal-2
Advertisement
Table of Contents
