Component Identification - Graco A Series Manual

Component Identification

Component Identification
A Airless spray gun
B Power switch
C Pressure control knob
C1 Setting Indicator
D Pump fluid outlet fitting
G Suction tube
H Prime tube (with diffuser)
J Prime/Spray valve
L Inlet screen
M Paint hose
N Handle
Q Tip guard
R Reversible spray tip
S Gun trigger safety lever
(page 11)
T Gun fluid inlet fitting
V Gun fluid filter
X Power cord
Z Pump priming button
AA Plug Adapter
AB Plug Adapter Retainer
8
Dispenses fluid.
Turns sprayer ON and OFF.
Increases (clockwise) and decreases (counter-clockwise) fluid pressure in
pump, hose, and spray gun.
To select function, align symbol on pressure control knob with setting
indicator, page 11.
Threaded connection for paint hose.
Draws fluid from paint pail into pump.
Drains fluid in system during priming and pressure relief.
• PRIME position directs fluid to prime tube.
• SPRAY position directs pressurized fluid to paint hose.
• Automatically relieves system pressure in overpressure situations.
Prevents debris from entering pump.
Transports high-pressure fluid from pump to spray gun.
Used to help transport sprayer.
Reduces risk of fluid injection injury.
• Atomizes fluid being sprayed, forms spray pattern and controls fluid flow
according to hole size.
• Reverse unclogs plugged tips without disassembly.
Prevents accidental triggering of spray gun.
Threaded connection for paint hose.
Filters fluid entering spray gun to reduce tip clogs.
Supplies sprayer with electricity
Manually taps inlet ball to loosen if stuck.
Adapts power cord to Australian electrical outlet.
Retains plug adapter to power cord.
3A1782D