Technical Data - Graco A Series Manual

Technical Data

Technical Data
Working pressure range
Electric Motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, Sprayer only
Weight, sprayer, hose, & gun
Dimensions (Upright):
Dimensions (Folded):
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Wetted parts, pump and hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range◆❖
Operating temperature range✔
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
34
Length
Width
Height
Length
Width
Height
stainless steel, zinc plated carbon steel, brass, ultra-high molecular weight
polyethylene (UHMWPE), Carbide, Nylon, Aluminum, PVC, polypropylene,
aluminum, brass, carbide, nylon, ultra-high molecular weight polyethylene
0-207 BAR, 0-21 Mpa (0-3000 psi)
4.5A (open frame, universal)
1/2
1.02 lpm (.27 gpm)
6.4mm X 7.5 m (1/4 in. x 25 ft)
0.015 in (0.38 mm)
6.0 kg (13.3 lb)
7.5 kg (16.5lb)
34.8 cm (13.7 in)
41.1 cm (16.2 in)
46.3 cm (18.2 in)
N/A
N/A
N/A
1.0 mm², 3-wire, 1.8 m (6 ft)
1/4 npsm external thread
3/4 in. internally threaded
(standard garden hose)
1190 micron (16 mesh)
fluroelastomer
(UHMWPE), zinc
1500 Watt minimum
220-240V AC 50/60 Hz, I phase, 10A
-35° to 71° C (-30° to 160° F)
4° to 46° C (40° to 115° F)
3A1782D