Graco A Series Instructions-Parts List Manual

INSTR.UCTIONS/PARTS LIST
307-758
aRIco
Rev A
T h i s manual contains IMPORTANT
WARNINGS and INSTRUCTIONS
READ AND RETAIN FOR REFERENCE
120 VAC, 16 Amp.
ULTRA"500 AIRLESS PAINT SPRAYER
2750 psi (195 bar) MAXIMUM WORKING PRESSURE
Basic, without hose, gun, spray tip kit or tip
Model 231-032. Series A
Model 231-041
spray tip kit, and spray tip of choice.
Included Sprayer Model 231-034, hose, gun, RAC Ill
Same as 231-041 except is CSA certified
Model
220- 4 09.
Series B
PATENT NO. 4,397,610
PATENTED 1983, CANADA
BREVETE 1984
FOREIGN PATENTS PENDING
INDEX
Warnings
................................
2, 3
Avertissement
.....
;
....................
4, 5
Advertencia
.............................
6, 7
Introduction
................................
0
Setup
.........................................
9
Operation
..................................
10
Shutdown 8 Care
.......................
Troubleshooting Guide 13-20
Flushing Guidelines :.12
SDin Test
...................................
19
: ,
11
....................
.............
Bridge Test
................................
20
ReDair Section Index
....................
21
Sprayer
32,
33
How To Order Replacement Parts.33
Pressure Control
......................
34
Paits List B Drawings
.............................
...........................
Technical Data Back Cover
Circuit Board
35
................
Warranty
.......................
Back Cover
Aluminum and Zinc Materlal Hazard
WARNING
such. solvents in this equipment. Such use could reault in a serious chemical reaction, with the possiblllty of explo-
Never use 1.1.1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents.or fluids containing
sion, which could causa death, aerious bodily injury and/or substantial property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
GRACO INC. P.O. Box 1441 MINNEAPOLIS, MN 55-1444
@COPYRIGHT 1988 GRACO INC.
i