Sensorflash Software (Update Firmware) - Sensor Therm METIS M3F1 User Manual

METIS M3F1

SensorFlash Software (Update Firmware)

8 SensorFlash Software (Update Firmware)
The software SensorFlash is used to update the firmware of Sensortherm pyrometers. Press Firmware
Update H3 / M3 in the Communication/Options tab (see 7.4) to start the software. Each SensorTools
software has integrated the latest firmware files with the release date. In addition, the latest software
and firmware releases is available on the home page in the download area under
www.sensortherm.de/en/download-section.
Select the COM port
your pyrometer is con-
nected with and press
"Connect".
The grey status bar
shows your device if
connected.
Click "Open Flashfile" to
select and open a new
firmware file
Select the new and suit-
able BIN file with a dou-
ble click or with "Open".
(SensorTools firmware
path: C:\Program Files
(x86)\Sensortherm
GmbH\SensorTools\Firm
ware).
Now the button "Flash" is
available, press it to start
the upgrade process.
Confirm the safety note.
Important: Do not interrupt the power supply during this process!
The firmware will be
flashed with the new
version. Wait until the
progress bar is finished
and the confirmation
message (Congratula-
tion) appears.
The device is by pressing "OK" automatically logged out
from SensorFlash, for further use with SensorTools the
pyrometer must be re-connected (see
the pyrometer).
7.1.1 Connecting
33