Other Safety Devices; Electrical And Mechanical Limit Stops; Power Supply; Controls - vimec V64 B.I. Use And Maintenance

8.3) Other safety devices

a) Electrical and mechanical limit stops
CAUTION: in this case the lift remains locked
out of use and an authorised VIMEC technician must
be called in to put it back into service.
b) Power supply
c) Controls
CAUTION: Pressing two buttons simulta-
neously, whether on the board on the lift or the
board at the floor, is strictly prohibited.
CAUTION: Never use the lift if the controls do
not work in the “dead man” mode.
d) Operation by hand.
e) Irreversible drive
f) Motor brake
g) Emergency stop button
CAUTION: Check monthly that the emergency
STOP button is working properly. If the STOP but-
ton does not halt lift movements, DO NOT USE the
lift! Call in an authorised VIMEC technician imme-
diately.
9) MAINTENANCE
CAUTION: In all cases, call in only staff au-
thorised by VIMEC for servicing and repairs; use
only original spare parts.
CAUTION: The recommended maintenance
frequencies must be complied with.
9.1) Parts requiring regular inspection
Skill level: OS - Specialist operator authorised by
VIMEC.
CAUTION: Disconnect the power supply be-
fore starting maintenance, by turning the Master
Switch to OFF.
Then padlock the box containing the Master Switch.
Six-monthly checks:
a) Safety devices
b) Electromagnetic brake
c) Drive mechanics
d) Safety gear
CAUTION: Keep well away from all un- pro-
tected moving parts.
e) Stability of the rail
13
7502026