Emerson FB1100 Termination Board Field Replacement Manual page 6

Hide thumbs Also See for FB1100:

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide

D301820X012

March 2018

Important

Only use accessories supplied with the flow computer or sold by Emerson as spare

parts for this flow computer. If you substitute a part you obtain elsewhere you will void

your certification unless it is the identical part from the same manufacturer as that

supplied with the flow computer from Emerson.

EXPLOSION HAZARD - - Substitution of any components may impair suitability for

Class I, Division 1 or Class I, Division 2.

EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed

or the area is known to be non-hazardous.

EXPLOSION HAZARD - - Do not replace batteries unless power has been switched off

or the area is known to be non-hazardous. Batteries must only be changed in an area

known to be non-hazardous.

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-

hazardous. Performing this operation in a hazardous area could result in an explosion.

EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing

cover(s) in a hazardous location could result in an explosion.

WARNING!

DANGER

Fb1200