Emerson FB1100 Termination Board Field Replacement Manual page 15

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide
Rear End Cap Removal
4. Remove power at terminal block TB1.
5. If your unit doesn't include an internal battery, skip to Step 8. If the unit has an
internal battery which is connected, use a #1 Phillips-head screwdriver to loosen
the four captive fastening screws on the HMI module.
Captive Fastening Screws
6. Grasp the HMI module and remove it by gently pulling it straight out.
D301820X012
March 2018
13