Ambient Weather WS-2000 User Manual page 12

1. Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as
shown in Figure 10 .
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter.
3. Channel Number: The WS-2000 supports up to eight transmitters. To set each channel
number (the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure
11.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Figure 11.
Switch in down position.
Version 2.12
Figure 10
Switch in up position.
©Copyright 2020, Ambient LLC. All Rights Reserved. Page 12