Triggercontrol - Toshiba BC Series Instruction Manual

TriggerControl

TriggerControl features are related to image acquisition using trigger.
This camera series provides two kinds of exposure synchronization.
1. Normal Shutter mode
2. Random Trigger Shutter mode
In Random Trigger Shutter mode, two kinds of trigger input are available.
1. Trigger signal via the CameraLink CC1 (HardwareTrigger)
2. Trigger command via software command (SoftwareTrigger)
The following table shows the combination of operation mode of this camera series.
Trigger Mode
Normal Shutter mode
Random Trigger Shutter mode
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
: Free run operation (internal synchronization)
: Synchronized with external trigger input
Operation Mode
Synchronization
Free run
HardwareTrigger
SoftwareTrigger
* The camera operation not mentioned above is not supported.
55 / 73
Exposure Control
'ExposureTime' register control
-Fix mode:TriggerSequence0
'ExposureTime' register control
-Level mode:TriggerSequence1
Trigger pulse width control
-Fix mode:TriggerSequence0
'ExposureTime' register control
http://www.toshiba-teli.co.jp/en/
D4296087A