Toshiba BC Series Instruction Manual page 59

- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
The pulse width should be 14.8 μs or more.
It is not supported when the ShortExposureMode is enable (ON).
PixelFormat
Mono8
Mono10/Mono12
* T1, T3 and T4 are typical value
* T2 = pulse width setting value
- Trigger Delay
The delay time from the input of the trigger signal to the start of exposure can be set.
For details of Random Trigger Shutter operation, please refer to 'Timing' section in 'Specification'.
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
TRIG
Exposure
FVAL
LVAL
DVAL
DATA OUT
T1
HighFramerateMode
OFF
ON
OFF/ON
TRIG
Exposure
FVAL
LVAL
DVAL
DATA OUT
T4
T2 T3
T1 [μs]
12.4
10.6
16.7
TriggerDelay
57 / 73
T3 [μs] T4 [μs]
565.7 26.8
565.1 24.9
566.4 31.0
D4296087A
http://www.toshiba-teli.co.jp/en/