Toshiba BC Series Instruction Manual page 60

● Register
IIDC2 address
Register Read
address Write
0x0020 703C R/W
0x0020 705C R/W
0x0020 707C R/W
0x0020 70BC R/W
0x0020 70DC W.O.
Legacy address
Register Read
address Write
0x91 R/W
0x92 R/W
0x93 R/W
Notes on Random Trigger Shutter mode:
- When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility
of causing the malfunction. In this case, please input a proper trigger signal.
● Note
- In SoftwareTrigger operation, the delay time from 'TriggerSoftware' to exposure is not guaranteed.
- TriggerDelay is applied to both of HardwareTrigger and SoftwareTrigger.
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
Memory
Default Register name
save
0x0 TriggerMode
✓
0x0 TriggerSequence
✓
0x0 TriggerSource
✓
0x0 TriggerDelay
✓
- - SoftwareTrigger
Memory
Default Register name
save
0x0 Shutter mode
✓
0x0 Random trigger mode
✓
0x0 Trigger polarity
✓
0x0:Normal shutter mode 0x1:Random trigger Shutter mode
0x0:Fix mode, 0x1:Level mode
Selects a trigger source of random trigger shutter.
0x0:Line0(CC1),0x40:Software
Sets the delay from trigger detection to exposure start.
*TriggerDelay / 37500000 [sec]
0x0(0sec) ～ 0x47868C0(2sec)
0x8:Execute SoftwareTrigger
0x0:Normal shutter(default), 0x1:Random trigger shutter
0x0:FIX mode (default), 0x1:pulse width mode
0x0:Negative(default), 0x1:Positive
58 / 73
Description
Description
D4296087A
http://www.toshiba-teli.co.jp/en/