Usersetcontrol - Toshiba BC Series Instruction Manual

UserSetControl

You are able to save a user setting to the non-volatile or volatile memory of the camera.
There are 15 user memory channels for user setting.
By using user memory, you are able to restore frequent used settings at the time of next start-up.
The following table is the list of registers applied to "UserSetLoad"/"UserSetSave".
Category
TransportlayerControl
ImageFormatControl
AcquisitionControl
(*) DPC and SequentialShutter entries are stored to a single channel. Entries are shared with all channels.
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
List of registers to be applied to UserSet
Register name
CameraLink Tap
CameraLink CLK
OffsetX
Width
OffsetY
Height
BinningHorizontal
BinningVertical
DecimationHorizontal
DecimationVertical
ReverseX
ReverseY
PixelSize
TestPattern
AcquisitionFrameRateControl
AcquisitionFrameRate
AcquisitionFrameIntervalControl
AcquisitionFrameInterval
HighFramerateMode
Category
TriggerControl
ExposureControl
DigitalIOControl
AnalogControl
LUTControl
UserSetControl
SequentialShutterControl
DPCControl
66 / 73
Register name
TriggerMode
TriggerSequence
TriggerSource
TriggerDelay
ExposureTimeControl
ExposureTime
ShortExposureMode
LineInverterAll
Gain
BlackLevel
Gamma
LUTEnable
UserSetDefault
SequentialShutterEnable(*)
SequentialShutterTerminateAt(*)
SequentialShutterEntry(*)
DPCEnable(*)
DPCNumber(*)
DPCEntryX(*)
DPCEntryY(*)
D4296087A
http://www.toshiba-teli.co.jp/en/