After Sale Service; Warranty / Liability; Spare Parts - SATA SATAjet 4000 Series Operating Instructions Manual

12. After Sale Service

Accessories, spare parts and technical support may be obtained from
your SATA dealer.

13. Warranty / Liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA cannot be held responsible especially in the following
cases:
• When the operating instructions are disregarded.
• When the product is used in other than the intended ways of usage.
• When untrained staff are employed.
• When no personal protection equipment is worn.
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly

14. Spare Parts [13]

Art.
Description
No.
1826 Pack of 4 anti-drip devices for 0.6 l PVC gravity flow cup
3988 Single pack of 10 paint strainers
15438 Paint needle sealing
Swivel joint G 1/4 a for DIGITAL spray guns
16162
19745 Swivel joint G 1/4 a x M15 x 1 for non-DIGITAL spray guns
27243 0.6 l QCC quick change PVC gravity flow cup
49395 Screw-on lid for 0.6 l PVC gravity flow cup
76018 Pack of 10 x 10 paint strainers
76026 Pack of 50 x 10 paint strainers
86843 Air piston rod
133934 Pack of 3 sealings for spindle round/flat spray control
133942 Seal retainer (air side)