SATA SATAjet 4000 Series Operating Instructions Manual page 43

Table of Contents

Advertisement

Available languages

Available languages

• When using the spray gun, noise levels of 85 dB(A) may be exceed-
ed. Wear suitable hearing protection!
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use In Explosive Areas
Ex-sign
6.4.1 General
The spray gun is approved for the use / storage in explosive areas of Ex-
Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
6.4.2
Additional Information on the Electronic
Pressure Gauge
The electronic pressure gauge has passed a design examination. It has
been developed, constructed and manufactured in accordance with the
EU directive 94/9 EU. It has been classified according to II 2 G Ex ia IIC
T4 Gb, FM Global IS CL I, ZN 1, AEx ia IIC T4 IS CL I, DIV 1, GP A, B,
C&D, T4 and may be used and stored in the explosive zones 1 and 2 up
to 60°C ambient temperature. Inspection authority: KEMA 05 ATEX 1090
X.
Warning!
Equipment cat-
egory
Warning! Risk of explosion!
Device category
Gas category
Temperature level

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satajet 4000-110Satajet 4000-120

Table of Contents