Table of Contents
Advertisement
MOVING THE SILO
To clean the pellet pipe, without emptying the silo, proceed as follows:
loosen the 4 screws of the pellet pipe.
screw the feet making the rollers lean on the ground (fi gure 7.30).
move the silo towards the right paying attention to the wiring.
proceed with cleaning the pellet pipe and relative maintenance.
once completed, repeat the operations in reverse order to bring the silo to its initial position.
The rollers function is that to favour the side movement to clean the pellet pipe when the silo is full
and particularly diffi cult to move it without having to empty it.
fi gure 7.30
POSITIONING AND MOUNTING THE SILO
fi gure 7.29
Chapter 7
fi gure 7.31
51
Advertisement
Table of Contents
