Extraflame TERMOPELLET TC30 Installer Manual page 38

Numbering
29/15
28/14
Electrical features applicable external devices:
Max. voltage: 230 V
Frequency: 50 Hz
Max. power per channel: 250 W
For higher loads, realise an adequate interfacing electrical plant through remote-control switch.
With the boiler, 4 temperature probes have been provided which can be used to control accessories
outside the boiler, as described in the hydraulic layouts.
38
ELECTRICAL LAYOUT KEY
Air valve 2
Air valve 1
16 Lambda probe
19 Smoke temperature probe
20 Serial connector
50 Three polar power supply socket
42 Master bipolar switch
24 Smoke intake motor
23 Pellet feeding motor reducer
85 85°C safety bulb thermostat
100 100°C safety bulb thermostat
30 Ignition electrode
25 Trapdoor motor
45 Lambda probe power supply
11 Trapdoor positioning micro switch
12 Lower door positioning micro switch
13 Upper door positioning micro switch
4 Boiler water temperature probe
5 Pellet pipe temperature probe
17 Ecoder connector
70 Pellet feeding motor reducer probe connector
60 Smoke motor encoder connector
80 Pellet feeding motor reducer connector
48 Screw motor temperature probe
90 Fastom M/F connection power supply smoke motor
Description
CONNECTION TO ELECTRICAL PLANT
Chapter 5