Table of Contents
Advertisement
Chapter 7
Proceed levelling the boiler body and the tank separately. Subsequently bring the silo near the boiler and
couple the studs with the relative holes. At this point, fi x with the nuts.
If the adjustments carried out with the feet are not suffi cient to level the pellet silo with the boiler, place
additional spacers, using those provided, as indicated in the fi gures below.
fi gure 7.7
fi gure 7.8
fi gure 7.10
fi gure 7.9
Interrupt spaces until a uniform distance between
boiler and pellet silo has been obtained, as shown in
the fi gure at the side.
fi gure 7.11
47
POSITIONING AND MOUNTING THE SILO
Advertisement
Table of Contents
