2. Carefully unwind and pull off any hair or string that is wrapped between the
main unit and the side brushes.
3. Use a cloth dampened with warm water to remove dust from the brushes.
NOTE:
Only use the side brushes when completely dry.
4. Re-install the side brushes according to the left (L) and right (R) markings.
Cleaning the Sensors and Charging Pins
To maintain the best performance, clean the anti-drop cliff sensors and charging
pins regularly.
Dust off the anti-drop cliff sensors and charging contact pins using a cloth or the
provided cleaning brush.
CAUTION:
prevent damage caused by water.
1. Clean the charging dock pins.
2. Clean the three anti-drop cliff sensors and drive wheels.
Use dry dishcloth for cleaning, and do not use wet dishcloth to
-27-