Advertisement
Suction Control Button
2. Spot Cleaning Mode
Press
on the robot or
Cleaning Mode. Then press the
start the robot in Spot Cleaning Mode. The Spot Cleaning icon will display on
the remote control screen.
Spot cleaning is designed to clean a specific area with a spiral movement in a
radius of 3ft (1m) and should be used to clean a concentrated area of dust or
debris.
Spot Cleaning Icon
3. Single Room Cleaning Mode
Press
on the robot or
Cleaning Mode. Then press the
the robot in Single Room Cleaning Mode. The Room Cleaning icon will display
on the remote control screen. The robot will operate in Max Power Mode and
also vacuum the edges before finishing the cleaning session.
Make sure to confine the robot to the room by closing the door or creating a
physical barrier. The robot will automatically return to the start location once
finished.
on the remote control to start cleaning in Smart
button one time on the remote control to
on the remote control to start cleaning in Smart
button twice on the remote control to start
-18-
Advertisement
