Advertisement
OPERATING INSTRUCTIONS
CAUTION:
104°F (40°C) in order to ensure its safety and normal function. Make sure
the dust bin is installed before use.
General Operating Instructions
· Turn On Robot
Wake up robot by pressing
illuminate. To start the robot vacuum, either press the
press the
· Pause or Stop a Cleaning Session
Press
on the robot or
session. If you want the robot to return to the charging dock, press
remote control.
· Power Off Robot
Pause the robot and press
robot.
NOTE:
If the robot stops working for more than ten minutes, it automatically
enters the sleep mode (all the lights on the robot will turn off). Press
robot or any key on the remote control to wake up robot.
NOTE:
The robot will return to the charging dock automatically when the battery
level becomes low or when the robot finishes cleaning.
Select a Cleaning Mode (If Desired)
Your advanced robot has the capability of operating in 5 different modes to satisfy
all your cleaning needs.
1. Smart Cleaning Mode
Press
on the robot or
Cleaning Mode.
Press
again on the remote control to adjust the suction power level among
3 suction modes: Standard Mode, Max Power Mode and Quiet Mode. Max
Power Mode is ideal for cleaning thicker carpets and hard-to-sweep messes.
NOTE:
The suction control feature only works in Smart Cleaning Mode.
Operate robot at room temperature between 39.2°F (4°C) and
/
button on the remote control.
on the robot. The power indicator light will
on the remote control to pause a cleaning
on the robot for three seconds to turn off the
on the remote control to start cleaning in Smart
-17-
button again, or
on the
on the
Advertisement
