Advertisement
Single Room
Cleaning Icon
4. Edge Cleaning Mode
Press
on the robot or
Cleaning Mode. Then press the
start the robot in Edge Cleaning Mode. The Edge Cleaning icon will display on
the remote control screen.
This intelligent robot automatically reduces its moving speed once it detects a
wall and then cleans along the wall to ensure the edge is cleaned thoroughly.
The robot will return to the charging dock once finished.
Edge Cleaning Icon
5. Manual Cleaning
You can direct the robot to clean a particular area by using the directional
buttons on the remote control. Start the robot in Smart Cleaning Mode and
then use the directional arrows on the remote control to adjust the cleaning
path of the vacuum cleaner as necessary.
on the remote control to start cleaning in Smart
button three times on the remote control to
-19-
Advertisement
