Advertisement
Suction power is
weak.
Robot vacuum
cleaner cannot
be charged.
Robot vacuum
cleaner cannot
return to the
charging dock.
Dust bin is full.
Filter needs cleaning.
Filter needs to be
replaced.
The battery may be
depleted.
Dust bin is not
installed correctly.
Robot sets on Quiet
Mode.
Filters are missing or
installed incorrectly.
The charging pins
on the robot are not
aligning with the pins
on the charging dock.
The charging dock or
charging adapter is
damaged.
Debris accumulated
on the charging pins.
There are objects
near the charging
dock.
The robot is stuck in
an area or tangled
with an object.
Empty dust bin.
Follow filter cleaning instructions on
page 22.
Purchase online at www.vacmaster.
com or call (866) 384-8432.
Charge the battery as instructed on
page 14.
Check dust bin for correct installation
and ensure it is snapped firmly in
place.
Press the
control to switch to Max Power Mode.
Check filters for correct installation.
Make sure charging pins are cleaned
and in direct contact with each other.
Purchase online at www.vacmaster.
com or call (866) 384-8432.
Clean charging pins.
Remove any objects that are closer
than 5ft (1.5m) from the front and 3ft
(1m) from either side of the dock.
Pick up the robot and remove any
obstructions. Manually re-connect
robot to charging dock.
-31-
button on the remote
Advertisement
