Area & Speed Meter Setup (Wizard) - FARMSCAN jackal V3.5 Manual

AREA & SPEED METER SETUP (WIZARD) – INPUT 2
The Jackal can display Speed & Area in any combination of km/Ha or
mph/acre.
A pickup can be mounted either on a wheel hub or shaft. (Example image
right)
NB: THERE SHOULD BE A 5-10MM CLEARANCE
BETWEEN SENSOR AND MAGNET
Sensors Required
•
Wheel sensor pickup 2 (Reed) or 3 wire (Proximity)
•
Magnet (Used with 2 wire sensor)
Available Connections
REFER TO PAGE 4
SETUP
From the front screen press SETUP
Select WHEEL
AM-JACKAL-B / OCT 2018
Switch
Highlight WIZARD and press SELECT
Leave the calibration method as
m/pulse
Auto Set > PAGE 10
Manual Ratio > PAGE 11
WWW.FARMSCANAG.COM
Reed
Switch
Prox
Choose your
calibration method
Press NEXT
9