FARMSCAN jackal V3.5 Manual page 9

MAIN MENU
The level of Jackal unlock will determine what options are viewable and available to be edited.
Wizard
Inputs
Front Screen
Other
Settings
GPS/Serial
About Jackal
Diagnostics
Factory Reset Returns the Jackal to factory default.
8
Use the NAV button down to reveal further menu information
Run a predefined wizard for setting up the Jackal Basic as an Area Meter or Tachometer.
View what the inputs are setup as.
Order the display lines on the front screen
Change implement width and units (cm,m, ft, yd, in, km, mi), alarm notification settings,
simulate speed & language (English, French, German, Bulgarian).
When an external GPS is connected view and ensure the GPS is setup correctly.
Setup baud rate and confirm GPS messages (NMEA messages RMC or GGA+VTG are
required) Latitude, Longitude, heading, speed, date & time.
Shows current version of Jackal software and unlock codes installed on the unit.
Shows current input voltage, current draw and input diagnostics when activated.
WWW.FARMSCANAG.COM AM-JACKAL-B / OCT 2018