FARMSCAN jackal V3.5 Manual page 6

GPS
KIT #T-135
GPS units supplied from Farmscan Ag are pre-programmed and
ready to use with the Jackal Basic.
The diagram to the right shows which terminals to connect your
GPS to.
Insert the black wire to (B1) and the white or yellow wire into
(B11) and the red wire into (B5)
Use the wizard to setup the port and calibrate once installed
using the default baud rate of 19200 baud.
GGA, VTG, RMC supported.
An adapter cable is also available to purchase from Farmscan Ag – Part Number AC-135
AM-JACKAL-B / OCT 2018 WWW.FARMSCANAG.COM 5