Table of Contents
Advertisement
Chapter 4
Operation
Loading PLC 4 Microtrol
Programs
4 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Use the following procedure to load a recorded program into PLC-4
Microtrol memory:
1.
Install the recorder as described in chapter 3.
2.
Set the BAUD RATE switch to 1200 baud. Select the track
containing the desired program.
3.
Set the power ON/OFF switch to the ON position.
4.
Insert a data cartridge into the recorder.
5.
Wait for the recorder to complete the repacking operation .
6.
Type [AUX FUNC] 41 on the 1770-T12 programmer.
7.
Wait until the 1770-T12 programmer displays the message:
TAPE LOADING
COMPLETE
8.
Type [CLEAR] on the 1770-T12 programmer to terminate the load
function.
Advertisement
Table of Contents
