Data Transfer; Connecting Ton-Vera Vet To The Pc; Transferring Data To The Pc - Ametek Reichert Tono-Vera Vet Instructions For Use Manual

Instructions for Use

Data Transfer

Tono-Vera Vet is capable of transmitting data via Bluetooth® to EMR,
using ReichertSync Software. To successfully transmit data, Tono-
™
Vera Vet must be paired with a PC that has ReichertSync installed on
it. To obtain a copy of ReichertSync, contact the Reichert Technical
Support Group at the contact information at the back of this manual.
Connecting Tono-Vera Vet to the PC
Install ReichertSync on your PC. Refer to the ReichertSync
1 1
Instructions for Use to set up Tono-Vera Vet in ReichertSync.
Navigate to the Bluetooth screen in the Menu.
2
3
Press the Select Button to enable
Bluetooth. The Bluetooth icon will
turn white when Bluetooth is enabled.
TonoVera-28461
Follow the directions in ReichertSync to pair Tono-Vera Vet and
4
the PC. When Bluetooth is enabled, a Bluetooth icon will appear
in the upper right corner beneath the Battery Indicator. This
indicates the status of the Bluetooth connection.
No Dots: Green Dots:
Not Connected Connected and Able to
Transfer Data
(continued)
NOTE: After Tono-Vera Vet is paired to the PC, the Bluetooth
connection will automatically reconnect when the device is powered
up. If Tono-Vera Vet does not automatically reconnect to the PC, refer
to the Troubleshooting section of this manual.
To disable Bluetooth, navigate to the Bluetooth screen in the Menu
5
and press the Select Button. The large Bluetooth icon will turn gray
and the small Bluetooth icon in the upper right will disappear.

Transferring Data to the PC

After obtaining Final IOP Results, press the center Multifunction
1
Button to transfer data to the PC. A countdown may appear
indicating that data is transferring.
Once the data has been transferred, a Bluetooth icon in a green ring
2
will briefly appear on the screen. The IOP measurements will clear
out and the device will be ready to take a new measurement.
NOTE: If an error occurs, the Bluetooth symbol will appear in an
orange ring. Refer to the Troubleshooting section of this manual.
14. 14.
5 5
16308-101 Rev. A • 19