Instructions For Use; Installing The Batteries; Rechargeable Battery Model; Aa Battery Model - Ametek Reichert Tono-Vera Vet Instructions For Use Manual

Instructions for Use

Installing the Batteries

CAUTION: Use only the battery type specified in technical specification
section of this manual.

Rechargeable Battery Model

Install the country-specific adaptor to the Charging Plug. Insert one end of
1
the USB-C Charging Cable into the Charging Plug, and the other end into the
back of the Tono-Vera Vet Charging Base.
Connect the Tono-Vera Vet Charging Base to an AC wall outlet.
2
Slide the Tono-Vera Vet Li-Ion Rechargeable Battery Pack into Tono-Vera Vet
3
until the Battery Pack Releases click into place.
Place Tono-Vera Vet into the Tono-Vera Vet Charging Base with the screen
4
facing the user.
When the device is properly docked, a beep will sound and the battery
5
charging symbol and percentage charged will briefly appear on the screen.
NOTE: The device may also be charged using the USB-C Charging Cable and
the Charging Plug by inserting one end of the USB-C Charging Cable into the
USB-C Charging Port at the bottom of Tono-Vera Vet.

AA Battery Model

Insert the four AA batteries into the Tono-Vera Vet AA Battery Pack.
1
Be sure to install the batteries so the positive and negative ends
are aligned according to the inscription on the holder.
Slide the Tono-Vera Vet AA Battery Pack into Tono-Vera Vet until the
2
Battery Pack Releases click into place.
1 3
2 4
1 2
5
95%
16308-101 Rev. A • 10