Linhai LH1100U-D Service Manual page 88

CHAPTER 7 Rear and Front Gearcase
Fig 30
31. Tighten the electromagnet to a torque of
41~54Nm.→Fig 31(page 28).
Fig 31
32. Make sure that the centring pins is
in their correct position on the rear
gearcase cover.
→Fig 32 (page 28).
Fig 32
33. Apply Loctite 510 sealant evenly on the
LH1100U-D SERVICE MANUAL 2019.0
surface of the seal.
→Fig 33 (page 29).
Fig 33
34. Mount the right backstop E, with the oil
seal then tighten the seven bolts F
M8(L30) to a torque of 20~25Nm.
→Fig 34 (page 29).
Fig 34
35. Mount the left backstop A, then
tighten the six bolts B M8
(L25) to a torque of 20~25Nm.
→Fig 35 (page 29).
Fig 35
36. Mount the sealing washer C and oil drain
plug D, then tighten the oil drain plug D to
a torque of 15~20Nm.
→Fig 36 (page 29).
CHAPTER 7 Rear and Front Gearcase. 7- 14