Disassembling And Assembling; Draining Oil And Coolant; External Components - Linhai LH1100U-D Service Manual

05-E4B, 05-E4BG SERIES, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Draining Oil and Coolant

(2) External Components

Draining Oil and Coolant
CAUTION
• Never remove radiator cap until coolant temperature is
below its boiling point. Then loosen cap slightly to the stop
to relieve any excess pressure before removing cap
completely.
1. Prepare a bucket. Open the drain valve to drain coolant.
2. Prepare an oil pan. Remove the drain plug to drain engine oil in
the pan.
Air Cleaner and Muffler
1. Remove the air cleaner.
2. Remove muffler retaining nuts to remove the muffler.
(When reassembling)
• Install the muffler gasket so that its steel side face the muffler.
Alternator and Fan Belt
1. Remove the alternator (1).
2. Remove the fan belt (2).
3. Remove the starter (3).
(When reassembling)
• Check to see that there are no cracks on the belt surface.
IMPORTANT
• After reassembling the fan belt, be sure to adjust the fan
belt tension.
(1) Alternator
(2) Fan Belt
1-S29
ENGINE
9Y1210784ENS0027US0
9Y1210784ENS0028US0
(3) Starter
9Y1210784ENS0029US0
KiSC issued 03, 2019 A