Reset To Factory Default - Ixon IXrouter3 Installation Manual

4.4 Reset to factory default
When you want to reset the IXrouter3 to factory default, you first need to remove the device from
your company in the fleet manager app of the IXON Cloud. The IXrouter3 itself can be reset to
the factory default settings by pressing and holding the reset button on top for 5 seconds. The
ACT LED will blink while the reset button is pressed. Upon release of the button, the ACT LED will
rapidly blink if the button was pressed long enough to trigger a reset. Wait for the IXrouter3 to
restart. You can then reconfigure the IXrouter3 if desired.
Warning!
This action cannot be undone. All settings will be reset to factory default.
www.ixon.cloud
14