Ixon IX2400 Quick Start Manual

Additional Help and Support
For additional product support, specifications, a detailed user manual and installation tips
go to support.ixon.cloud. For direct technical support and questions, get in touch with our
Technical Support team via support@ixon.cloud or +31 (0)85 – 744 1105.
Version 1.4 06042021
Connectivity speci cations
Model Wi-Fi Cellular
IX2400
Region: Worldwide
IX2405
LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18
B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
GSM: B2/ B3/ B5/ B8
IX2410 802.11b/g/n
Client + AP mode
802.11b/g/n Region: Worldwide
IX2415
Client + AP mode LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18
B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
GSM: B2/ B3/ B5/ B8
All models can connect via a wired connection (Ethernet cable).
General Speci cations
5x GbE (4x LAN, 1x WAN), 1x USB2.0
Ports
12-24 VDC +/- 20% LPS 2A
Power supply
About 2.5 to 5 Watt (idle)
Power consumption
-20°C to 65°C
Temerature range
111 x 95 x 28mm
Dimensions
Metal case, IP20, DIN rail mountable
Physical specs
Certi cations
Two years
Warranty
Lifetime access included
IXON Cloud
Warning
The IXrouter allows the user to remotely connect to industrial control equipment via Ethernet, Wi-Fi, and
cellular network connections. The remote user may fully operate and monitor the local control system and
affect the function and control of the application similar to a local operator. Proper Control, Security and
Safety Procedures should be considered and implemented when utilizing the remote access feature.
Wi-Fi and 4G models
The antenna used with this transmitter must be installed with a separation distance of at least 20 cm from
all persons and must not be co-located or operated in conjunction with any other antennas or transmitters.
Only an antenna tested with the wireless transmitter or a similar antenna with equal or lesser gain may be used.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IXrouter
Quick Start Guide
Seamlessly integrated with the IXON Cloud