Introduction - jablotron 100+ Manual

PERIODICAL MAINTENANCE
:: It is necessary to have regular and timely maintenance checks performed in order to secure
reliable functioning of the system. Most of the maintenance is carried out by an installation
company at least once a year during periodical maintenance inspections.
:: User maintenance consists mainly of keeping the individual devices clean. The ADMINISTRATOR
of the system can switch se system to a MAINTENANCE mode in order to be able to open the
detectors (change batteries) or to remove them from the installation. Consult the request to set
the MAINTENANCE mode with the installation company. If the system is confi gured to the
"EN 50131-1, grade 2" system profi le, the MAINTENANCE mode is not available.
:: The system can be switched to the maintenance mode via the J-Link software or from the menu
of the keypad with LCD display. After authorization a "Maintenance mode" can be selected with
a selection of sections where the maintenance is needed. In the maintenance mode no alarms
will be triggered in the selected sections, including opening or removing the detectors from the
installation.
:: The maintenance mode is indicated by the activation button fl ashing green (2 fl ashes each 2
seconds) and by the two segment buttons of the particular section lighting off.
:: When handling with the devices a care must be taken to avoid damage to the plastic and
mechanisms of the detectors.
:: The cover is usually secured with a tab that needs to me slightly pushed into the detector's body
with a small tool (e.g. screwdriver) and then the cover can be taken off. In some cases, the tab is
secured with a small locking screw that must be unscrewed fi rst.
:: When changing batteries in the detector, always replace all batteries in the particular detector at
the same time (use batteries of the same type and from the same manufacturer).
:: Some devices may require testing (e.g. fi re detectors). For more information please contact your
service technician.
1.

INTRODUCTION

The JABLOTRON 100
individual sections. Up to 230 devices can be connected and the system offers up to 128 multi-
purpose programmable outputs (e.g. home automation).
24
+
system is designed for up to 600 users and it can be divided into 15