jablotron 100+ Manual page 14

Statuses of individual sections are indicated by status indicators A, B, C, D above the LCD display
and by the functions buttons. The control panel can be operated directly (setting or unsetting the
alarm and other automation functions) using function buttons on the keypad. The function buttons
and the status indicators A, B, C, D are colorfully backlit in order to clearly indicate the section
status.
Authorization can be done by entering an access code on the keypad or using an RFID card/tag
assigned to a particular user. Each user can have one code and one RFID chip (a card or a tag).
If the users want to control multiple sections simultaneously, they must authorize themselves and
then press function buttons of the particular sections subsequently. This way the users can unset all
sections (for example the house and the garage) within one single authorization.
Structure and description of the internal LCD keypad menu:
Administrator
or User
authorization
by the code or
RFID tag/card
34
:: GREEN – Unset ::
CANCEL WARNING
INDICATION
SECTION
CONTROL
PG CONTROL
EVENT
MEMORY
SETTING
PREVENTED
FAULTS
IN SYSTEM
BYPASSED
DETECTORS
SYSTEM
STATUS
SETTINGS
DISPLAY
SETTING
MAINTENANCE
MODE
YELLOW – Partially Unset
Allows you to cancel alarm/unsuccessful setting
indication in all sections to which the user has access
Allows you to control the system's sections to which
the user has access rights and are enabled in the
internal settings.
Allows the user to control PG programmable outputs
depending on the user's permissions and according to
the internal settings.
Displays a detailed list of the event memory.
Shows a list of triggered detectors preventing setting
the system, provided this option is activated in the
control panel confi guration.
Displays a list of all detectors indicating system faults
from sections to which the user has access rights.
Displays a list of all blocked detectors in sections to
which a user has access rights.
Shows system status (list of triggered detectors,
triggered tamper contacts, low batteries, bypassing,
Allows editing of users and devices
(only when USB is disconnected).
Allows adjustment of keypad backlight intensity and
display contrast.
Allows the Administrator to switch assigned sections
to the Maintenance mode.
:: RED – Set