Output Mode Of Receiving Data - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

3.2.8 Output mode of receiving data

Receiving data output mode refers to the mode in which the network outputs data after E810-DTU (ZG120-ETH)
receives wireless data;
3.2.8.1 Transparent output
If output mode of the configuration device is transparent output, the module outputs the original data through the
serial port after receiving the wireless data;
3.2.8.2 Data+Short address
When output mode of the device is data + short address, after the module receives wireless data, serial port will
output the original data + the short address of the sending device.
3.2.8.3 Data+Long address
When output mode of the device is data + long address, after the module receives wireless data, serial port will
output the original data + the long address of the sending device;
3.2.8.4 Data+RSSI
When output mode of the device is data + RSSI, after the module receives wireless data, serial port will output the
original data + the RSSI value of the received data packet;
3.2.8.5 Data+Short address+RSSI
When output mode of the device is data + short address + RSSI, after the module receives wireless data, serial port
will output the original data + the short address of the sending device + the RSSI value of the received packet;
3.2.8.6 Data+Long address+RSSI
When output mode of the device is data + long address + RSSI, after the module receives wireless data, serial port
will output the original data + long address of the sending device + RSSI value of the received data packet.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-DTU(ZG120-ETH)User Maunel