Overview; Introduction; Hardware Parameter; Main Specification Parameter - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

1. Overview

1.1 Introduction

E180-DTU (ZG120-ETH) is a high-power ZIGBEE gateway, working as
ZIGBEE node devices with adaptive network speeds (up to 100M, full duplex). It
provides four working modes, i.e. TCP Server, TPC Client, UDP Server, and UDP
Client. Two SOCKETs can work at the same time. There are four kinds of logical
devices in a ZigBee network: coordinator, router, terminal device, and dormant
terminal. ZigBee network consists of a coordinator and multiple routers or multiple
non-dormant terminals and dormant terminals. Users can perform related configurations through WEB page.

2. Hardware parameter

2.1 Main specification parameter

No.
1
3
Simple transparent
4
transmission method
5 TCP Server connection
6
IP acquisition method
7
8
9
10
11
Operating temperature
12
Operating humidity
13
14
15 Storage temperature
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
Parameter Specification
Network port
RJ45，10/100Mbps
specifications
IP、 TCP/UDP、 ARP、 ICMP、 IPV4
Network protocol
TCP Server、TCP Client、UDP Server、UDP Client、IoT platform
Supports up to 6-way TCP connections
Static IP、 DHCP
Available
DNS
User configuration Web configuration
Coordinator 99mA Router 103mA Terminal 102mA dormant terminal
Operating current
95mA
8V~28VDC, 12V or 24V power supply is recommended
Voltage
-40 ~ +85℃，Industrial grade
10% ~ 90%，Relative humidity, non-condensing
Size 84mm*82mm*25mm
Average weight 125.8g
-40～+125℃，Industrial grade
E180-DTU(ZG120-ETH)User Maunel