Udp Server Instruction - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
3. As shown in the figure below, communicate with another DTU, and the network debugging assistant connects to
the DTU device for testing.

4.6 UDP Server Instruction

1. Set the SOCKET A1 network type of device A and device B to UDPS (UDP Server) and the local port 8886.
Click Save to restart the module.
2. Set the "Network Debug Assistant" to UDP (the host does not distinguish between UDP Client and UDP Server),
the local host IP is set to 192.168.4.101, the local host port number is set to 8886, and the remote host is set to
192.168.4.101:8887
3. As shown in the figure below, communicate with another DTU, and the network debugging assistant connects to
the DTU device for testing.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-DTU(ZG120-ETH)User Maunel