Udp Client Instruction - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
3. As shown in the figure below, communicate with another DTU, and the network debugging assistant connects to
the DTU device for testing.

4.5 UDP Client Instruction

1. Set the network type of SOCKET A1 of device A to UDPC (UDP Client), the destination IP is 192.168.4.10 and
the destination port is 8887. Click Save to restart the module. Set the "Network Debugging Assistant" to UDP (this host
does not distinguish between UDP Client and UDP Server), the local host IP is set to 192.168.4.10, the local host port
number is set to 8887, and the remote host is set to 192.168.4.101:8886.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-DTU(ZG120-ETH)User Maunel