Switch Output Do Mode Setting; Device Address - Ebyte MA02-AAC 2220 Series User Manual

2di + 2ai + 2do

Hide thumbs Also See for MA02-AAC 2220 Series:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

or off.

When the LED indicator light is on, it means the relay is closed (normally open and normally closed);

When the LED indicator is off, it means that the relay is not closed (normally open off, normally closed on).

4.3.2 Switch output DO mode setting

(1) Level mode

Output according to the level set by the user. The switching characteristics of the level mode are similar to the

function of a self-locking switch.

(2) Pulse mode

After the switch output DO is turned on, the set pulse width time (in ms) is maintained, and the switch output DO is

automatically turned off. The pulse width setting range is 50～65535 (default 50).

(3) Follow mode

After the user sets the follow mode, set the follow input terminal. The switch output DO terminal is consistent with

the DI input terminal.

Note: Multiple switch output DO terminals can be set to follow one DI input terminal, and one switch output DO

terminal can not be set to follow multiple DI input terminals.

4.4.1 Device address

Device address composition: hardware address + software offset address

Figure 4-3-1 Switch output DO interface

【2DI+2AI+2DO】MA02-AACX2220 User Manual

Table of Contents