Husqvarna 27012992044 Information page 5

Scope of supply
1x base support, preassembled

1x locking cylinder set
1x GPS navigator bracket

4x collar screw M8x50

4x bushing 8.2x23x12

4x absorbing element
4x collar bushing 8.2x14.5x10.5

1x covering cap

4x bushing 13x8.2x4.5



1x GPS navigator bracket, preassembled

1x retaining bracket, left
1x retaining bracket, right

1x retaining bracket, left
1x retaining bracket, right

1x mounting plate

4x screw M5x14

8x screw M5x10
4x silent block 15x15 M5x8

4x toothed washer

12x nut M5
Assembly

- Remove screws .
NOTE:
Do not remove the clamp halves.

- Position base support (included).

- Mount screws (included).
- Move the handlebar to the desired position and tighten screws
to 20 Nm.
NOTE:
For single-part clamps, bushings
ed.





(included) must fi rst be mount-

5