Stanley SSC22 Original Instructions Manual page 9

Closed-type, grease-sealed ball bearings are used
throughout. These bearings have sufficient lubrication packed
in them at the factory to last the life of the chop saw.
Cleaning
WARNING: unplug the tool before you use a cloth
to clean the housing.With the motor running, blow
dirt and dust out of all air vents with dry air at least
once a week. Wear safety glasses when performing
this. Exterior plastic parts may be cleaned with a
damp cloth and mild detergent. Although these
parts are highly solvent resistant, NEVER use
solvents.
Blowing dust and grit out of the main housing by
means of an air hose is recommended and may be
done as often as dirt is seen collecting in and
around the air vents. Always wear proper eye and
respiratory protection.
ACCESSORIES
The performance of any power tool is dependent upon the
accessory used. Stanley accessories areengineered to high
quality standards and are designed to enhance the
performance of power tool.
NOTE: Accessory must be rated for use at speed equal to or
higher than nameplate RPM of tool with which it is being used.
CAUTION: The use of any other accessory not
recommended for use with this tool could be
hazardous.Use only high-strength Type 1 organic
bonded wheels rated 4100 rpm or higher.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
STANLEY provides a facility for the collection and
recycling of STANLEY products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the address
indicated in this manual. Alternatively, a list of authorised
STANLEY repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
(Original instructions)
NOTES
STANLEY's policy is one of continuous improvement to our
products and as such, we reserve the right to change product
specifications without prior notice. Standard equipment and
accessories may vary by country. Product specifications may
differ by country.
Complete product range may not be available in all countries.
Contact your local STANLEY dealers for range availability
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers are
staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you.
TECHNICAL DATA
CHOP SAW
Voltage
Frequency
Power input
No-load speed
Max diameter
Weight
Thickness
Bore size
Level of sound pressure according to EN62841
Sound pressure (L )
pA
Sound pressure uncertainty (K
Sound power (L )
WA
Sound power uncertainty (K )
WA
Vibration emission value a
h
(a ) =
h
Uncertainty (K) =
ENGLISH
SSC22
V 220-240
Hz 50-60
W
min
-1
mm
kg
mm
mm
dB(A)
) dB(A)
pA
dB(A)
dB(A)
m/s
2
m/s
2
2200
4100
355
15.5
3.0
25.4
87
3
107.5
3
4,9
1.5
9