Page 7
ENgLiSh 18V CORDLESS CUTOFF TOOL SFMCM300 EC‑Declaration of Conformity Congratulations! You have chosen a STANLEY FATMAX tool. Years of experience, Machinery Directive thorough product development and innovation make STANLEY FATMAX one of the most reliable partners for professional power tool users.
2) Electrical Safety The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of STANLEY FATMAX. a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
ENgLiSh h ) Do not let familiarity gained from frequent use of contacts eyes, additionally seek medical help. Liquid tools allow you to become complacent and ignore ejected from the battery may cause irritation or burns. tool safety principles. A careless action can cause severe e ) Do not use a battery pack or tool that is damaged or injury within a fraction of a second.
ENgLiSh FURTHER SAFETY INSTRUCTIONS FOR h ) The arbour size of wheels and flanges must properly fit the spindle of the power tool. Wheels and flanges ABRASIVE CUTTING‑OFF OPERATIONS with arbour holes that do not match the mounting hardware of the power tool will run out of balance, vibrate Kickback and Related Warnings excessively and may cause loss of control.
) The arbour size of wheels, flanges, backing pads or any other accessory must properly fit the spindle of STANLEY FATMAX chargers require no adjustment and are the power tool. Accessories with arbour holes that do designed to be as easy as possible to operate.
This does not apply to the CAUTION: Burn hazard. To reduce the risk of injury, vehicular charger. charge only STANLEY FATMAX rechargeable batteries. Other types of batteries may burst, causing personal injury Charging a Battery (Fig. A) and damage.
Page 13
(such as outside sheds or metal buildings in winter), or Dangerous Goods Manual of Tests and Criteria. reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or In most instances, shipping a STANLEY FATMAX battery pack metal buildings in summer). will be excepted from being classified as a fully regulated •...
STANLEY FATMAX batteries with a regardless of Wh rating. Shipments of tools with batteries (combo STANLEY FATMAX charger may make them burst or kits) can be air shipped as excepted if the Wh rating of the battery lead to other dangerous situations.
2. Insert battery pack into the charger. Rotatable Guard Fuel Gauge Battery Packs (Fig. B) Hex wrench Some STANLEY FATMAX battery packs include a fuel gauge, which consists of three green LED lights that indicate the level Accessory attachment location of charge remaining in the battery pack.
Page 16
WARNING: Since accessories, other than those offered WARNING: Adjust the position of the guard to provide by STANLEY FATMAX, have not been tested with this the maximum protection from loose particles and sparks product, use of such accessories with this tool could be thrown from the wheel.
Page 17
ENgLiSh Attaching the Dust Port Adaptor (Fig. A, G) Variable Speed Trigger (Fig. A) A dust port adaptor 8 comes available for use with this The tool is turned on and off by pulling and releasing the tool. This accessory connects directly to the tool's rotatable variable speed trigger .
Optional Accessories Cutting Metals WARNING: Since accessories, other than those offered Observe the following to avoid potential hazards when by STANLEY FATMAX, have not been tested with this cutting metals. product, use of such accessories with this tool could be ‑...
ENgLiSh Belt Hook (Fig. L) Optional accessory, sold separately. WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/ installing attachments or accessories. WARNING: To reduce the risk of serious personal injury, DO NOT suspend tool overhead or suspend objects from the belt hook.
Page 20
Stanley Fat Max Tel. 031‑68 61 00 Box 94, 431 22 Mölndal 031‑68 60 08 Türkiye Stanley Black & Decker Turkey Alet Üretim Tic. Ltd.Şti. Puh. +90 216 665 2900 нчerenköy Mahallesi Umut Sokak. Faks +90 216 665 2901 No: 10‑‑12 / 82‑‑83‑‑84 Kat: 19 https://tr.stanleytools.global...